PoE (Power over Ethernet) is a technology that is capable of delivering power and data simultaneously on twisted pair Ethernet cabling. With PoE injector we can make a non-PoE compatible switch work with PoE devices . This is done by powering compliant devices over a single Ethernet cable such as Cat5e, Cat6, Cat6a, etc.  

Check out our list of PoE injectors – different items – different Brands

TP-Link PoE Injector  ( TL-POE150S ) 

  • IEEE 802.3af compliant
  • Auto-determine the necessary power requirements
  • Gigabit speed support
  • Plug-and-Play, requires no configuration

HARDWARE FEATURES
Interface 2 10/100/1000Mbps RJ45 Port
AUTO Negotiation/AUTO MDI/MDIX
1 48VDC POWER INPUT PORT
Network Media 10BASE-T: UTP category 3, 4, 5 cable (Max 100m)
EIA/TIA-568 100Ω STP (Max 100m)
100BASE-TX: UTP category 5, 5e cable (Max 100m)
EIA/TIA-568 100Ω STP (Max 100m)
1000BASE-T: UTP category 5, 5e, 6 cable (Max 100m)
Power Supply 15.4W (Max. 48VDC)
LED Indicator PWR
Dimensions ( W x D x H ) 3.2*2.1*0.9 in.(80.8*54*24 mm)
SOFTWARE FEATURES
Basic Function Compatible With IEEE 802.3af Compliant PDs
Delivers Power Up To 100 Meters
Auto-Determine The Necessary Power Requirements

TENDA – PoE15F / Switch /10/100Mbps PoE Injector

The PoE injector PoE15F can realize synchronous delivery of device network data and power via one Ethernet cable (Cat.5 or better). The output power of per port is up to 15W, which can serve as an outlet for a PoE device (powering via RJ45 port). You can connect PoE15F to an IEEE 802.3af compliant PD, such as wireless AP, IP camera, IP phone, etc. In a sense, it is a good choice for you to reduce the installation cost and improve the network performance.

PoE30G-AT /Switch/ PoE Injector delivers up to 30W output power per port

The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of wtih 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion, but also simplifies the deployment of power lines.

Power over Ethernet Adapters Ubiquiti 

PoE Adapters power Ubiquiti® products that support passive PoE.

Models: POE‑15‑12W, POE‑24‑12W, POE‑24‑12W‑G, POE‑24‑12W‑G‑WH, POE‑24‑24W, POE‑24‑24W‑G, POE‑24‑24W‑G‑WH, POE‑24‑24W‑WH, POE‑24‑30W, POE‑24‑30W‑G‑WH, POE‑24‑7W‑G‑WH, POE‑24‑AF5X, POE‑25‑5W, POE‑48‑24W, POE‑48‑24W‑G, POE‑48‑24W‑G‑WH, POE‑48‑24W‑WH, POE‑50‑60W, POE‑50‑60W‑WH, POE‑54‑80W, U‑POE‑af
 
 
802.3at Gigabit PoE Injector  IP-COM 
 
The PoE injector PSE30G-AT can directly provide dc power to equipment which need power supply, plug and play, convenient for network construction, Date&Power Out port maximum output power of 30 w. PSE30G-AT can auto-start short-circuit function to cut off power supply when meet too high current or electricity interruption, to prevent equipment burnout and avoid networking failure caused by electricity interruption or installing error. This function make PSE30G-AT can be widely applied to wireless network devices, bluetooth, IP-telephone which compliant with IEEE802.3af/at. Matched with Ethernet/Power separator to change the current networking into source LAN, easy management, strengthen controlling and decrease the maintenance cost.
 
  • Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af、IEEE802.3at Standard
  • Transmission distance up to 100 Meters Overvoltage, overcurrent and overload proctection Plug and play