Firstly let us see what is media converter ? Fiber Media Converter are used to enable connections of UTP copper-based Ethernet equipment to various optical fiber cable. Fiber to Ethernet Converters use a copper transceiver to transform the signal from a UTP / RJ45 Ethernet link to one that can be used by a fiber optic transceiver. Hence, Ethernet media converters are simple networking devices that make it possible to connect two dissimilar media types for instance twisted pair Cat6 cable with fiber optic cables.
10/100Mbps Multi-Mode Media Converter
MC100CM V5
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards
- Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
- Extends fiber distance up to 2km
- Half/Full-Duplex transfer mode for FX port
Full Duplex Flow Control (IEEE 802.3x)
Half Duplex Flow Control (Backpressure)
Extends fiber distance up to 2km
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely - Wavelength – 1310nm
- Multi-mode Fiber
- Dimensions (W*D*H ) — 3.7*2.9*1.1 in. (94.5*73.0*27.0 mm)
- Max Power Consumption – 2.5W
- Standards and Protocols — IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Gigabit Single-Mode Media Converter
MC210CS V4
- 1 10/100/1000Mbps Auto-Negotiation RJ45 port supporting Auto-MDI/MDIX
- Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
- Complies with IEEE 802.3ab and IEEE 802.3z
- Extends fiber distance up to 15km
- IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
- Single-mode Fiber
- Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
Extends fiber distance up to 15km
Gigabit SFP Media Converter
MC220L V4
- 1 10/100/1000Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX
- Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
- Complies with IEEE 802.3ab and IEEE 802.3z
- FX port supports hot-swappable
- Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiber
10/100Mbps Single-Mode Media Converter
MC110CS V6
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards
- Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
- Extends fiber distance up to 20km
- Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
Full Duplex Flow Control (IEEE 802.3x)
Half Duplex Flow Control (Backpressure)
Extends fiber distance up to 20km - IEEE 802.3, IEEE 802.3u, IEEE 802.3x
- Single-mode Fiber
Gigabit Multi-Mode Media Converter
MC200CM V4
- 1 10/100/1000Mbps Auto-Negotiation RJ45 port supporting Auto-MDI/MDIX
- Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
- Complies with IEEE 802.3ab and IEEE 802.3z
- Extends fiber distance up to 0.55km using 50/125um fiber
Fiber distance up to 0.22km using 62.5/125um fiber - Multi-mode Fiber
10/100Mbps WDM Media Converter
MC112CS V5
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards
- Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
- Adopts WDM technology, transmitting and receiving data on one single fiber
- Extends fiber distance up to 20km
- 1310nm Tx/1550nm Rx
- Adopts WDM technology
Half/Full-Duplex transfer mode for FX port
Extends fiber distance up to 20km - IEEE 802.3i, IEEE 802.3u
10/100Mbps WDM Media Converter
MC111CS
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards
- Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
- Adopts WDM technology, transmitting and receiving data on one single fiber
- Adopts WDM technology
Half/Full-Duplex transfer mode for FX port
Full Duplex Flow Control (IEEE 802.3x)
Half Duplex Flow Control (Backpressure)
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
Extends fiber distance up to 20km - 1550nm Tx/1310nm Rx
- Single-mode Fiber
DFE-855MI MEDIA CONVERTER
To sum up , This media converter converts 10/100BASE-TX Ethernet twisted –pair signals to 100BASE- FX fast Ethernet fiber signals. Maximum fiber cable distance for multi-mode is 2kms.
Features
- Complies to IEEE 802.3u standards
- Ease of Installation and Use
- Auto negotiation of Speed and Duplex Settings on TX port.
- Low Cost
DFE-855S-50I MEDIA CONVERTER
To sum up, This media converter converts 10/100BASE-TX Ethernet twisted –pair signals to 100BASE- FX fast Ethernet fiber signals. Maximum fiber cable distance for single-mode is 50km.
Features
- Complies to IEEE 802.3u standards
- Ease of Installation and Use
- Auto negotiation of Speed and Duplex Settings on TX port.
- Low Cost
DFE-855S-15I MEDIA CONVERTER
To, sum up, This media converter converts 10/100BASE-TX Ethernet twisted –pair signals to 100BASE- FX fast Ethernet fiber signals. Maximum fiber cable distance for single-mode is 15Kms.
Features
- Complies to IEEE 802.3u standards
- Ease of Installation and Use
- Auto negotiation of Speed and Duplex Settings on TX port.
- Low Cost
CONTACT US for further queries / price details