D-Link Media Converter
D-link media converter :-
DFE-855MI MEDIA CONVERTER
D-Link Media Converter
This media converter converts 10/100BASE-TX Ethernet twisted –pair signals to 100BASE- FX fast Ethernet fiber signals. Maximum fiber cable distance for multi-mode is 2kms.
Features
- Complies to IEEE 802.3u standards
- Ease of Installation and Use
- Auto negotiation of Speed and Duplex Settings on TX port.
- Low Cost
| Specification |
| Standards |
| • |
IEEE802.3u100BASE-TX, l00BASE- FX (Fast Ethernet,100Mbps) |
| • |
Supports Full Duplex Ethernet Mode. |
|
| Fiber Optic Connectors |
| • |
Two connectors are provided for fiber optic cable connection. One is labeled “Tx” for Transmission of optical data; the other is labeled “Rx” for reception of optical data. |
|
| Ethernet Connectors |
| • |
Standard RJ-45 port is provided for connecting to Ethernet. |
|
| LED Interface |
| • |
Two LED’s are provided one for detecting the Fiber Link and the other for detecting the Tx(Ethernet) Link. |
| • |
When units are connected and there is data transfer both the LED’s are blinking simultaneously. |
|
| DFE-855Mi: |
| • |
Wavelength 1310 nm |
| • |
Fiber distance :Multi mode 2 Km |
| • |
Fiber :50/125 um or 62.5/125um Multimode Fiber |
|
| Dimensions |
| • |
130(L) x 100 (B) x 30(H) mm |
|
| Power Input |
|
DFE-855S-50I MEDIA CONVERTER
This media converter converts 10/100BASE-TX Ethernet twisted –pair signals to 100BASE- FX fast Ethernet fiber signals. Maximum fiber cable distance for single-mode is 50km.
Features
- Complies to IEEE 802.3u standards
- Ease of Installation and Use
- Auto negotiation of Speed and Duplex Settings on TX port.
- Low Cost
| Specification |
| Standards |
| • |
IEEE802.3u100BASE-TX, l00BASE- FX (Fast Ethernet,100Mbps) |
| • |
Supports Full Duplex Ethernet Mode. |
|
| Fiber Optic Connectors |
| • |
Two connectors are provided for fiber optic cable connection. One is labeled “Tx” for Transmission of optical data; the other is labeled “Rx” for reception of optical data. |
|
| Ethernet Connectors |
| • |
Standard RJ-45 port is provided for connecting to Ethernet. |
|
| LED Interface |
| • |
Two LED’s are provided one for detecting the Fiber Link and the other for detecting the Tx(Ethernet) Link. |
| • |
When units are connected and there is data transfer both the LED’s are blinking simultaneously. |
|
| DFE-855Mi: |
| • |
Wavelength 1310 nm |
| • |
Fiber distance :Multi mode 2 Km |
| • |
Fiber :50/125 um or 62.5/125um Multimode Fiber |
|
| Dimensions |
| • |
130(L) x 100 (B) x 30(H) mm |
|
| Power Input |
|
DFE-855S-15I MEDIA CONVERTER
This media converter converts 10/100BASE-TX Ethernet twisted –pair signals to 100BASE- FX fast Ethernet fiber signals. Maximum fiber cable distance for single-mode is 15Kms.
Features
- Complies to IEEE 802.3u standards
- Ease of Installation and Use
- Auto negotiation of Speed and Duplex Settings on TX port.
- Low Cost
| Specification |
| Standards |
| • |
IEEE802.3u100BASE-TX, l00BASE- FX (Fast Ethernet,100Mbps) |
| • |
Supports Full Duplex Ethernet Mode. |
|
| Fiber Optic Connectors |
| • |
Two connectors are provided for fiber optic cable connection. One is labeled “Tx” for Transmission of optical data; the other is labeled “Rx” for reception of optical data. |
|
| Ethernet Connectors |
| • |
Standard RJ-45 port is provided for connecting to Ethernet. |
|
| LED Interface |
| • |
Two LED’s are provided one for detecting the Fiber Link and the other for detecting the Tx(Ethernet) Link. |
| • |
When units are connected and there is data transfer both the LED’s are blinking simultaneously. |
|
| DFE-855S-15i |
| • |
Wavelength 1310 nm |
| • |
Fiber distance : Single mode 15Km |
| • |
Fiber : 9/125um Singlemode Fiber |
|
| Dimensions |
| • |
130(L) x 100 (B) x 30(H) mm |
|
| Power Input |
|
check more from D-link
